When you are carrying out work with your woodworking planer blade or black & decker planer blade, understanding the importance of keeping the blade in good condition is essential. If you are taking the time to purchase a woodworking planer blade of a high quality, it deserves your time and attention with regards to the upkeep of its condition.

Varying types of metal can be used to produce this product, which is often seen to be used in the woodworking and joinery industries.

It is quite easy to tell when your blade such as a black & decker planer blade is in need of being sharpened. If the blade is in good condition, you can usually tell this by turning it upwards towards a light source. If it is in good working order then it should look absolutely flat in the light.

It is easy for your woodworking planer blade to wear down over the course of time. Following advice with regards to knife maintenance can be essential to the longevity of the product that you own. It goes without saying that it is worth spending the time taking care of your product, as if you don’t do this it will cost you dearly further down the line with relation to the expense that would be brought through the purchase of a new woodworking planer blade such as a black & decker planer blade.

Some knives can be easier to sharpen than others, but you can always find advice from professionals on how to do this. It is simply inevitable that you will need to put at least some of your time into the maintenance of you woodworking planer blade, particularly if you are someone that regularly uses it as part of work.

With such an array of knives available to consumers, it can sometimes be difficult to know which knife is most suitable for each job requiring one. If you want to achieve professionalism in the work you are doing, a hooked blade for your knife can sometimes be the right route to go down with regards to the knife that you decide to choose.

A hooked blade may be used for a whole number of industry tasks, as it can help you to achieve results that simply are not possible with other types of knife blades available across the industry market. Within the packaging industry, a hooked blade can sometimes be exactly the right knife that you need. The functionality of a hooked blade means that it is specifically tailored for cutting tasks that workers need to carry out within this particular line of work.

A hooked blade can also be ideal if you are a workman working on a task that requires you to cut sections of roofing, synthetic wrap, insulation or other building materials. The flexibility presented by a hooked blade is part of the reason it can be such an attractive proposition to consumers, as it is able to allow you as a workman to work confidently and precisely in your field in ways that wouldn’t be permitted through the use of other knives and blades.

The reversible, sharpened double hook that can often be associated with a hooked blade is just one a number of unique qualities that it is a product possesses. The penetration that a hooked blade can allow you to achieve when cutting through a material during a certain task is perhaps the most unique selling point of the blade and the story of its success.

Ensuring that you fit the best trimming knife blades to your Stanley knives is essential if you want to complete a job to the highest possible standard. Your Stanley knives can be fitted with these heavy duty trimming blades if you need to complete a task that requires a more durable blade.

These general purpose blades can be fitted to your Stanley knives to be used as carpet fitting tools. They are also used in the cutting of vinyl and other sheet materials. The straight cutting edge ensures that accuracy is an essential parameter considered in guaranteeing that the heavy duty tasks for which more heavy duty blades are required are completed to the highest possible standard.

So if you require a knife blade that is uncompromising on providing a high quality of finish that can be used for multiple purposes and fit to existing Stanley knives that you own, you should look no further than trimming knife blades. The satisfaction gained from using the blades will only further encourage repeated use, and leave you highly satisfied with the end results produced from using the blades.

An Olfa safety knife can provide the best possible solution to simple cutting tasks. If you choose this tool to complete the job required you can be safely assured that it will be providing high quality and accuracy when cutting. The knife is made out of only the finest quality of tool steel, through a multi-step production process and the finished item is of the highest standard available on the market.

The Olfa safety knife possesses multiple functionalities in its design, and has a number of features that make it stand out in its market. As a workman using the knife you can work in the knowledge that all Olfa safety knife blades are adjusted to the relevant means. Hardness, sharpening angles, the coarseness of whetstone and the speed of grinding are all individually considered for each time of blade.

Longevity forms an essential part of the design components that build up the Olfa safety knifes special qualities. The blade has the best balance of sharpness and longest blade life according to its usage.

A complex design process formed the basis of the designing of the knife. The founder of Olfa, Yoshio Okada, determined the shape of the blade cutter after grabbing and holding hundreds of stones along a river. The unique design qualities and processes that go into making the Olfa safety knife blades ensures its users that they are obtaining a knife that brings with it characterizes that cannot be found in competitive tools on the market.

Comfort is carefully considered in the manufacture of each and every knife that is designed, and the best hand comfort is achieved. This is an essential quality for workers using the knife, as being comfortable whilst working breeds higher productivity and as a result, a more successful end result will be produced.

The hand-it control of the knife ensures the ultimate cutting performance when it is used. Typical uses for the knife are in warehousing, carton opening, scrap booking, card making, quilting and fabric use. The obvious versatility that an Olfa safety knife provides during its use means that it is a very worthwhile investment if as a worker you are looking for a knife that not only delivers high performance, but one that also is extremely comfortable to use due to the ergonomic considerations that have gone into the creation of it.

A Gr8 Pro Safety Knife can make all the difference when you need a knife for a heavy duty task that needs to be carried out. It is always essential to have the right tools for the right fitting job, and with this knife you are always guaranteed the highest standard of tool available.

The knife is specifically designed with heavy duty work in mind, so you can be sure that it is the right tool for the job if you are looking for something that guarantees effectiveness with relation to solidity and durability. The knife possesses a unique moving action, which enables a special effectiveness when it is being used. This moving blade action prevents snags or jams, which is essential to quick and effective work being done using the knife.

As a workman, once you are able to concentrate on the task in hand, the job you are able to do is of a much higher standard. The Gr8 Pro Safety knife provides the user with the knowledge that they can concentrate solely on the work that they are doing, safely in assurance that the tool they are using possesses the greatest functionality around.

The knife is designed so that it contains a swift blade change, as well as a built in tape cutter for the user, providing multiple functionality when using the knife. This can be essential when work needs to be done at rapid speed, whilst taking the time to ensure that there is no dip in the standard of quality of the work that is being carried out. When using this knife, you are already taking responsibility of time management whilst working. By saving time searching around for different tools through using a knife that enable you to use it across different areas, you are already taking extra steps towards time management whilst working.

Safety is of paramount importance with the Gr8 Pro Safety knife, and the enclosed blade prevents accidents to fingers and those caused from carrying the knife within pockets. As the knife is pocket friendly, the user of the tool can feel safe when working at speed, with no worry that an injury may be caused if the knife is inadvertently placed in a pocket.

The Gr8 Pro Safety knife also has an ergonomically balanced body, which makes it incredibly easy to use whilst taking the time to ensure that you are maintaining working standards of high performance.

Choosing the right tool for the right task is essential when doing household maintenance. When fitting a carpet, having the correct knife is of the utmost importance. Using a Don Carlos knife guarantees that you will be working with the highest quality of carpet fitting tools available, and is a decision that you will not live to regret.

Having the correct equipment to hand can make all the difference to the finish and quality of the carpet that you are removing, replacing or inserting. When fitting a carpet, using the correct carpet fitting tools can be the difference between achieving a professional and an amateur finish. It is also important to carefully consider safety when using these knives, and this is something that is guaranteed.

The Don Carlos knife has a red anti-slip handle to ensure that it is used completely safely. The knife is extremely sharp to achieve the most professional of finishes and it can be re-sharpened many times as and when required. The knife is specially tailored for commercial use, and can be used in window and door manufacturing, repair works, carpet laying, the removal of window beads, cutting lino and trimming UPVC welds amongst other tasks.

Professional carpet fitters and floor layers need the best carpet fitting tools and that is a fact. Choosing a dolphin Knife or a delphin knife is easy if you make sure that the knives you are looking at are genuine products and not fakes. Sadly, there are some cheaper imitations out there, and they can easily found on the internet with a quick search on Google. But if you want a professional finish and a product that is guaranteed to last, choosing a genuine dolphin knife or dolphin knife is definitely the best option for you.

There are some things that you can do to make changing the blade of your dolphin knife or dolphin knife a breeze. When putting a new blade into your dolphin knife or dolphin knife, always put the blade in with the manufacturer’s details facing towards you. When the blade is blunt, you can open it up and see quite clearly whether you need a new blade or just to flip the blade over to the other side. Some dolphin knives and dolphin knives also have space inside them to hold spare blades. By storing blades internally in a dedicated compartment, you will never be without a spare to hand for your next job.

Getting a carpet to fit correctly is one of the most difficult jobs to do when fitting a carpet. But it is also one of the most important, as a well fitting carpet is the difference between a professional and an amateur finish. Using carpet fitting tools to fit a carpet is one way of getting a really professional finish on a carpet. The effective use of a Stanley knife such as a Stanley 1992, Stanley 5192 or a Stanley 1996 can also help to make the job neat and tidy.

If you have to lay one or more pieces of carpet side by side, use a safety knife or Stanley knife to cut through the pieces of carpet to make sure that they match each other exactly. You can then seam the edges with carpet fitting tools such as a carpet roller. There are various other carpet fitting tools you can use at this stage for example, a knee kicker, a carpet stretcher, and a wall trimmer. The carpet can also be trimmed using a Stanley knife such as a Stanley 1992, Stanley 5192 or a Stanley 1996.

Choosing a dolphin Knife or a delphin knife is easy if you make sure that the knives you are looking at are genuine. Sadly, there are some cheaper imitations out there, and they can easily found on the internet with a quick search. But if you want a professional finish and a product that is guaranteed to last, choosing a genuine dolphin knife or dolphin knife is definitely the best option for you.

Dolphin knives, or delphin knives as they are known in Germany, are the perfect choice for professional tradesmen such as floorers or carpet fitters. These types of knives are the most popular type of knives used to lay carpets and hard flooring such as lino or laminate flooring. The great thing about choosing a dolphin knife or dolphin knife is that they have a unique shape which is 3 dimensional, making them perfect for the uses outlined above.

Dolphin knives and dolphin knives are very balanced when cutting through the material required, and they are a pleasure to use due to their comfortable grip. Luckily, it is very easy to remove the blade of the dolphin knife should a new one be needed because of the convenient thumbscrew opening. Replacing the blade is easy and you don’t need a screwdriver to remove the blade and secure it back in. Using the thumbscrew, you can open and close it in just over three revolutions of the wheel.

Some dolphin knives and dolphin knives also have space inside them to hold spare blades. By storing blades internally in a dedicated compartment, you will never be without a spare to hand for your next job. Some compartments even hold up to 10 blades so your dolphin knife will always be sharp. The advantage of having spare blades on hand is that you never have to stop in the middle of a job to go out and buy a new blade for your dolphin knife, or search around to find your spares. By keeping them in the compartment within the knife, they are always there when you need them, so you can carry on with the task in hand without any disruption.

Delphin knife blades and dolphin knife blades consist of one aluminium blade which is manufactured from the highest quality aluminium and also polished to a finish that is attractive and durable.

A new carpet is a great way to revamp a room or even an entire house. When decorating, a new carpet can contribute to the overall effect of a makeover too. Installing a carpet isn’t the easiest of jobs and if you do decide to do it yourself, you need to make sure you have the right carpet fitting tools and other types of blades such as a Stanley knife or utility knife.

Using specialised carpet fitting tools will ensure that you make a professional job of fitting the carpet, as well as making sure you take your time and work methodically throughout the process. Carpet fitting tools can be purchased from a variety of good knife and blade suppliers throughout the UK, and buying quality carpet fitting tools is a must for getting the job just right.

Before you get out your carpet fitting tools or safety knife, you will need to remove the old carpet from the floor of the room you wish to work on. By removing the mouldings that surround the room and taking the door off, you will be able to easily take the old carpet out of the room and put the new one in.

Use a Stanley knife or similar, such as a Stanley 1992, Stanley 5192 or a Stanley 1996 to cut the carpet into strips which can be easily disposed of. You may want to give the carpet a vacuum before you use your Stanley knife to pick up as much dust and debris as you can to prevent yourself from breathing it in.

The next step you will need to carry out is to pull the carpet off the tackless strips and then roll it into sections. After you have laid the underpad you can move onto laying the carpet for your room. When installing the carpet, make sure that the piece you lay is a few centimetres bigger than the floor itself. This means that it can be trimmed with a Stanley knife to make it fit properly against the edges of the room.  Again, use a Stanley knife, such as a Stanley 1992, Stanley 5192 or a Stanley 1996 to cut the carpet. Or you could use a safety knife, as this will help you to get a clean, precise edge to the carpet for a professional finish.

To keep your black & decker planer blade or wood working planer blade in good working order, it is very important to carry out regular maintenance checks. By checking your blade regularly, you can be sure that the bevel is kept in good condition and that the blade is still sharp.

An effective way to check the sharpness of your bosch planer blade, your black & decker planer blade or your wood working planer blade is to tilt it upwards and turn it to the light. As you do this, look at how the light reflects upon the bevel of the planer blade. If the wood working planer blade is in good condition and good working order, the bevel should look absolutely flat in the light.

If you do not sharpen a knife or wood working planer blade properly, it will not work as well as it should do. Knives and blades need to be sharpened at different angles depending on the type of knife. Some knives are easier to sharpen than others but there are basic general rules that apply to sharpening a knife or a wood working planer blade. By following knife maintenance advice, you can be sure that your planer blade lasts as long as possible.

When embarking on a craft project, modelling or art project, it is really important to use knives and blades that are good for accurate, precision cutting. Often craft projects require very sharp, fine blades in order to get the detailed, accurate finish required of such hobbies, and Swann Morton knives or Stanley Knives can provide this high level of precision. By using the right blade for your crafting, modelling DIY or hobby craft project, you can ensure that your project will be of the highest quality.

Hobbyists and professionals alike find that Stanley 1992, Stanley 5192 and Stanley 1996 knives are just what they need for their craft projects. Whether it is hobby craft, art and craft or modelling, you need a knife or blade that produces consistent, accurate cuts. This way, you will get the quality finish you are looking for.

Swann Morton blades are also brilliant for crafting, as the quality of these types of knives is very good. Many crafters, both professional and hobbyists alike choose Swann Morton blades of their knives of choice and make a very good job of the projects that they embark on.

The correct maintenance of wood working planer blades is essential for keeping them working well for years to come. If you need to sharpen your wood working planer blade, black & decker planer blade or bosch planer blade, it is really important to do it very carefully using the correct tools.

If you do not sharpen a knife or blade properly, it will not work as well as it should do for the job you wish to do with it. Knives and blades need to be sharpened at different angles depending on the type of knife. Some knives are easier to sharpen than others but there are basic general rules that apply to sharpening a knife or a wood working planer blade.

If you decide to sharpen your bosch planer blade yourself, you should follow a series of simple steps to ensure that you do not damage the wood working planer blade or injure yourself in the process of sharpening. For example, when you assemble the planer blade, put the blade into the honing guide to make sure that it holds it in the bevel – side down position. Then you should adjust the blade so that the full bevel connects to the surface.

Firstly, your whetstone should then be oiled and tapping oil is useful for cleaning the metal surface. You should then attempt to remove any nicks on the blade of your wood working planer blade, black & decker planer blade or bosch planer blade. If you do find them, it is important to only apply the course side of the whetstone to the wood working planer blade. Ensure that the blade is worked with a pushing action instead of a pulling action to avoid burring the edge of the blade.

To keep your black & decker planer blade in good condition, regular maintenance checks are aessential. By checking your wood working planer blade at regular intervals, you can be assured that its bevel keeps in the best shape and the blade of it remains sharp.

A good way to check the sharpness of your bosch planer blade, your black & decker planer blade or your wood working planer blade is to tilt it and turn it towards the light. Observe how the light reflects upon the bevel of the blade and if it is sharp the bevel will appeaer flat.

Swann Morton knives and blades are the perfect choice for any crafting or modelling project. Stanley 1992, Stanley 5192 and Stanley 1996 knives are very durable and reliable for crafting and will easily cut through all grades of paper. They will also cut through mat board, foam board, fabrics, sheet metal and even plastic. Knives and blades such as these are great for individuals and professionals, and Swann Morton knives and blades are perfect for any craft or hobby use.

When embarking on a craft project, it is really important to use knives and blades that are good at precision cutting. Often craft projects require very sharp, fine blades in order to get the fine finish required of such hobbies, and Swann Morton knives or Stanley Knives can provide this high level of precision. Using the right blade for your crafting, modelling DIY or hobby craft project is very important.

Hobbyists and professionals alike find that Olfa knives and trimming knife blades are just what they need for their craft projects. Whether it is hobby craft, art and craft or modelling, you need a knife or blade that produces consistent, accurate cuts. This way, you will get the quality finish you are looking for.

When choosing a Swann Morton blade or Stanley knife blade it is important to get a product that is built to last. Craft knives used for modelling and art and craft projects are used repetitively and this amount of use can cause the knife or blade to become blunt very quickly. That is why it is important to look after your Swann Morton or Stanley knife, so that you may be able to use it for the maximum amount of time before you have to replace it with another.

Craft knives such as the Stanely 1992, Stanley 5192 and Stanley 1996 are very good for providing the highest level of control and precision to your work. They will quickly and effectively cut through lighter materials including paper and card, and even fabric and material. They are also suitable for cutting through thicker materials including plastics, balsa wood and even thin metal.

When you have chosen your craft knife, whether it be a Swann Morton knife or a Stanley knife, ordering from a reputable supplier is a must to ensure quick delivery, correct packaging, and a quality product.

Trimming knife blades are a very handy tool and should be in the toolbox of any good craftsman or tradesman. The trimming knife blades, hooked blades and concave blades supplied by Knife-point can be relied upon to last a very long time, saving money as they don’t need to be replaced as often.

Our trimming knife blades have a reversible polished steel blade, which have very accurately ground cutting edges which are perfect for precision cutting and will ensure that you make minimal mistakes. They also come in a convenient plastic box with a secure lid to ensure that your blades stay safe and sound until you need them, and can be reached easily when it is time to use them.

All of our hooked blades, concave blades and trimming knife blades are very suitable for businesses, professional tradesmen and private individuals. We also supply scraper blades which are excellent for decorator and painters alike because they do a great job of stripping wallpaper. They can be used to remove old, worn or unwanted wallpaper from walls, and although they are very sharp, they will not cause damage to the underlying surface material because of the way that they are designed.

Choosing the right hooked blades and carpet fitting tools for the job you plan to embark on is of the upmost importance. Our knives and blades are made in Sheffield and are of the highest quality, ideal for cutting flooring, textiles or roofing material.

Hooked blades are perfect for cutting roofing shingles before they are affixed to the roof of the building in question. It is important to keep roof shingles from lining up exactly, because without gaps the water may be unable to pass between them and under them. This prevents the roof from leaking and damaging the interior of the house, which could have a large financial impact on the occupants of the house.  Most tiles have guide marks on them which will make it far easier to use the hooked blade to cut the roofing shingles accurately.

When cutting the tiles with the hooked blade, it is important to take care to keep in line with the guide marks on the tile. Straying from them may result in an uneven pattern when the shingle is attached to the roof.

Cuts on your roofing shingles must keep to a in a uniform pattern, therefore the correct hooked blade will ensure that the cuts are even. Hooked blades can also be used to cut shingles so that they fit around pipes by cutting a circular cut out to fit the shingle around the pipe.

Based in Sheffield, Knife-point is dedicated to supplying businesses, professional tradesmen and private individuals with hooked blades, concave blades, trimming knife blades and scraper blades. We only supply the highest quality knives and blades to our customers, upholding the reputation of Sheffield as being the finest knife making city in the UK and possibly the world.

We provide a range of concave blades, trimming knife blades and scraper blades to a variety of people in all kinds of different industries. Scraper blades are perfect for painters and decorators because they do an excellent job of stripping wallpaper.

When the existing wall paper needs to be stripped from a wall because a new type is being put up or a home makeover is on the cards, scraper blades are the ideal choice. They are sharp enough to effectively remove the layer or layers of wallpaper without damaging the material underneath, and they are very resistant to bending even when a certain amount of pressure is applied to the scraper blade. Scraper blades from Knife-point can also be used for stripping artex and plaster board.

Trimming knife blades are also handy tools that can be ordered directly from Knife-point. Made in Sheffield, these general purpose blades are of the highest quality and are very heavy duty for long life and durability. These trimming knife blades can be used to cut carpet, vinyl and any other type of sheet material. They are also compatible with Stanley knives and can be used as a value replacement for Stanley knife blades.

Trimming knife blades should be in the toolbox of any good craftsman or tradesman, and these blades can be relied upon to last a long time. They have reversible polished steel blades which have very accurately ground cutting edges for precision cutting and minimal mistakes.

Every one of the hooked blades, concave blades, trimming knife blades and scraper blades on offer at Knife-point are very competitively priced and excellent quality. Our prices are very low for a knife and blade supplier with such a high quality of products and we try really hard to keep our prices competitive. We are also able to negotiate pricing when we receive a scheduled bulk or volume purchase. For this kind of discount, all you have to do is simply call us and we can have a chat about what we can do. We will do our very best to give you the best possible deal on top of our already very low pricing.

Hooked blades from Knife-point in Sheffield are of the highest quality. Our Sheffield based knife and blade business is one of the industry leaders in blades and we stock a variety of different products including Stanley knife blades and concave blades. We also supply a wide range of good quality and affordable hooked blades and carpet fitting tools to business across the UK, especially those that need to cut flooring, roofing or textiles in their everyday work.

When choosing the right hooked blade, it is important to make sure that the blade fits into your retractable utility knife. Before ordering from our knife and blade website, it is also important to ensure that the hooked blade is exactly the right type of blade to fit your utility knife, and will therefore be suitable to use for your cutting needs. Hooked blades are ideal for roofing contractors and carpet or floor installers, as they carry out the job quickly and efficiently without damaging the underlying material.

Hooked blades can be used for cutting roofing shingles before they are affixed to the roof of the building in question. This is important because roof shingles need to be kept from lining up exactly without gaps so that water can still pass between them and under them. This action obviously prevents the roof from leaking and damaging the interior of the house. Most tiles have guide marks on them which will make it far easier to use the hooked blade to cut the roofing shingles accurately.

Care should be taken to cut the tiles with the hooked blade in keeping with the guide marks on the tile, as deviating from these lines may create an awkward pattern when the shingle is attached to the roof. The correct hooked blade will ensure that the cuts on your roofing shingles remain in a uniform pattern. Hooked blades can also be used to cut shingles so that they fit around pipes. By cutting a circular cut out to fit the shingle around the pipe, a neat job can be achieved that will look good.

Hooked blades are used a lot for roofing, flooring and textiles; because they can be used to cut surface materials without damaging whatever is underneath. Hooked blades can be used for cutting carpet or linoleum. They are particularly handy for cutting carpet and lino because they are designed to be used for cutting without causing any damage to the surface beneath.

Concave blades and trimming knife blades are perfect for precision cutting on materials such as leather and marquetry. These types of blades are the perfect solution for projects that require a large amount of accuracy. Concave blades can be used on many different materials including composite aluminium sheet, wood, miliput, and craft materials. They can also be used for cutting fabrics and carpets.

Hooked blades have a hooked cutting edge at each end of the blade which makes them ideal for cutting sheet material. A hooked blade allows you to quickly and easily hook the blade over the end of the sheet of material that you would like to cut. You can then draw back; cutting only the layer of the sheet material that you wish to.

Hooked blades are the perfect type of blade for cutting sheet material including floor coverings and sheeting made of plastic. They can also be used for trimming roofing materials, linoleum and carpet fabrics. The blades themselves have deep hooks for cutting thick materials and work well in most standard utility knives. Hooked blades are perfect for use in the packaging industry.

It is really important to use a Stanley knife in a safe way, whether it is a Stanley 1992, Stanley 5192 or a Stanley 1996. One of the ways to protect yourself from Stanley knife blades is to wear protective goggles to prevent damage to your eyes. The sharp cutting blade of the knife can release bits of whatever surface you are cutting through, and this may get in your eyes if goggles are not worn to protect them.

If you are cutting through a thicker surface, then making a series of shallow cuts will penetrate the thick material thicker and faster than trying to cut through it in one go. By making shallow incisions with your Stanley knife blade, you can reduce your chances of the blade slipping and maybe even breaking in the process.

Another way of keeping yourself safe when you use Stanley knife blades is to make sure that you replace it whenever it becomes dull. You can tell when a blade is becoming old as it will feel more like it is tearing through the material rather than cutting through it. This can make the blade slip and therefore create a safety hazard.